Especially designed for the finest packaging of baby diapers and training pants.
Line speed: 1000 pieces/min
Packaging speed: 65 bags/min
PAKSIS ® D-7 is an innovative integrated counting-stacking-packing system for baby diapers, training pants and small incontinence products, performing at 1000 ppm and 65 bpm, with the quality and the reliability that only the market leaders can give. PAKSIS ®D-7 is the first remarkable result of PAKSIS, the Fameccanica-Optima alliance for delivering breakthrough projects in packaging.
|Working speed (production speed):||Up to 1000 pprm and 65 bags/min
(in case of bagger rate single row)
Up to 1000 pprm and 30 bags/min
(in case of bagger rate double row)
|Efficiency range:||95 ÷ 97%|
|Waste:||1 ÷ 2%|
|Product dimensions : H x L x T (min-max)||Min 100x160x12 mm
Max 140x280x28 mm
|Number of products per row:||6-42 product/row
(with 20 mm chain pitch)
|Stack dimensions : A x B x C (min - max)
(related to uncompressed folded product)
|Min 120x100x160 mm
Max 840x140x280 mm
|Finished bags dimensions, single stack : W x H x L||Min. 120x100x160 mm
Max. 420x140x560 mm
|Finished bags dimension, double stack : W x H x L||Min. 120x100x320 mm
Max. 420x140x560 mm
|Pre-made bags wicket dimensions:||Wicket height max : 45 mm
Wicket length min-max : 250 - 680 mm
Wicket width min-max : 200 - 580 mm
|Typical overal dimensions (LxWxH) :||8100 x 6600 x 2700 mm
(including electrical cabinet)
|Electrical Power consumption:||25 kVA|
|Compressed air consumption (supply)||25 l / packing cycle
|Standard process orientation :Right-hand process.Left-hand process orientation available upon request.|
|(*) The above data values are given for information only and depend on the machine configuration. They are not suitable for any official purpose.|
PAKSIS® D-t web site »
Available as a standard for the packaging of products in pre-made bags supplied in wickets.
Full servo technology: all operating units driven by servo-motors for maximum flexi- bility in meeting different packaging format requirements and for fast changeovers.
Sturdy design, with all process units easily and quickly accessible through protective LEXAN covers with hinged doors. Stainless steel or surface coatings for all parts in contact with the product. Designed and manufactured in co-operation with Optima Filling and Packaging Machines GmbH.
Two servo-motor driven product twist belts with gap adjustment. Innovative design product infeed system: driven by linear motor, intermittently swinging for continuously feeding the product into the stacking paddle-chain, with the chain motion or still.
Product collection with dual ("top & bottom") paddle-chain for maximum control of collected products, servo-motor driven for high speed operation and with automatic product reject system.
Stack counting and delivery system with double driven "cartesian" unit for a linear stack extraction through still paddle-chain for high speed operation.
Stack compression unit with two, stainless steal, compression plates with air cushion, each operated by a servo-motor & crank system for maximum compression up to 25 kN.
Over-compression feature for easy compressed stack transport and bag filling. Rapid change over by means of spindles. All compression strokes easily adjustable via control panel screen. Servo-motor driven shuttle to transfer the stack from the main compression into the bag. Stainless steal shuttle plates with air cushion for a no-friction stack transfer.
Rapid change over by means of spindles. Servo-motor driven bag pick-up and opening unit with mechanical clamps for bag opening and holding and with vacuum system to help bag opening. Rapid change over by means of spindle. Servo-motor driven automatic bag wickets conveyor.
Servo-motor driven welding station designed for impulse sealing, with upper and lower welding bars, air-cooled and with individual temperature controllers and with vacuum film holding system for high quality seal execution. Mechanically operated side gussets folding poles. Pneumatically operated trim cut-off knife. Lower welding bar with exhaust slot for trim removal.
|Finished bag dimension Single stack|
|Finished bag dimension Double stack|